User`s manual

58 59MAXDATA PLATINUM 7200 IR M6User Serviceable Platform Components

Removing the Top Cover

To remove the top cover, follow these instructions:

1. Observe the safety precautions, warnings, and cautions described in “Safety Information”.

2. If the chassis is rack-mounted, slide the chassis out far enough to expose the entire top cover.

3. Unscrew the two captive screws on the faceplate of the chassis.

4. Slide the top cover toward the back of the chassis until the tabs on the cover disengage with

the slots in the chassis.

5. Lift the cover to remove it.

Figure 10. Removing the Top Cover

Installing the Top Cover

To install the top cover, follow these instructions:

1. Observe the safety precautions, warnings, and cautions described in “Safety Information”

2. Place the top cover on the chassis so the tabs on the cover align with the slots on the chassis.

3. Slide the top cover towards the front of the chassis until it is fully closed.

4. Tighten the captive screws on the face plate of the chassis.

5. Slide the server into the rack.