User`s manual

44 45MAXDATA PLATINUM 7200 IR M6Server Platform Utilities

• Load SDRs only onto this server: When this box is checked, the SCW will ask you questions

about the SDRs and will load them based on how you answer those questions.

• Load FRUs and SDRs onto this server: The FRUs and SDRs are loaded based on the

master.cfg file found in the \FRUSDR folder in the Server Deployment Toolkit CD.

• Configure this server with a System Asset Tag: When this box is checked, the SCW will ask

you questions about the system asset tag to assign to the system.

• Configure the Channels on this server: The Configure Channels checkbox allows you to

configure the various channels available on the server.

• Configure the Users on this server: The Configure Users checkbox allows you to configure

the users supported on this server.

• Configure Advanced Features on this server: The Configure Advanced Features checkbox

allows you to configure the Advanced Features of an Management Module - Advanced Edition

system configuration. This option is available only on a system that uses the Management

Module - Advanced edition.

If your server has the Management Module - Professional installed, the following options are included

by default:

• Load FRUs and SDRs onto this server

• Configure Channels on this server

• Configure Users on this server

If your server has the Management Module - Advanced installed, the following options are included

by default:

• Load FRUs and SDRs onto this server

• Configure Channels on this server

• Configure Users on this server

• Configure Advanced Features on this server

After you decide which of the options to program and press the Continue button, the SCW will exit

from the graphical user interface mode and begin programming the options. If you do not select any

options, the SCW will exit.

Selecting or deselecting options on this screen does not affect the existing state of the options on

the server. If you check an option, it only implies that you intend to configure it. If you do not select

an option, it only implies that you do not want to make any changes to that option while using SCW;

it does not disable the option on the server.

After you press Continue, you are brought to a screen on which you need to set the date and time

on the server. The date and time are saved as soon as you press Continue. This screen also shows

you the versions of the HSC, firmware, and BIOS that are installed on the server.