User`s manual

40 41MAXDATA PLATINUM 7200 IR M6Server Platform Utilities
40 41MAXDATA PLATINUM 7200 IR M6Server Platform Utilities
The Device Properties Menu shows options for devices attached to the adapter. It is a large menu
and requires the use of the arrow keys to move fully to the left and fully down to see all configuration
options. Slide bars at the right and on the bottom of the screen help define your location in the menu.
The following list shows the available options for each setting category:
• MB/Sec: “[320]”
• MT/Sec: “[0]”, “[5]”, “[10]”, “[20]”, “[40]”, “[80]” “[160]”
• Data Width: “[16]” or “[8]”
• Scan ID: “[Yes]” or “[No]”
• Scan Luns >0: “[Yes]” or “[No]”
• Disconnect: “[On]” or “[Off]”
• SCSI Timeout: “[<10>]”
• Queue Tags: “[On]” or “[Off]”
• <Restore Defaults>: Discards all changes. No warning message is provided before discarding
the changes.
If you made changes before choosing to exit this menu, the Exit menu provides three options: “<Cancel
Exit>”, “<Save Changes then exit this menu>”, and “<Discard changes then exit this menu>”. To
exit the utility, select “<Exit the Configuration Utility>”. After exiting, the system will reboot.