User`s manual

40 41MAXDATA PLATINUM 7200 IR M6Server Platform Utilities

LSI Logic MPT SCSI Utility

The LSI Logic MPT SCSI Utility provides a way to configure SCSI features. This configuration utility

is accessed by pressing <Ctrl>-<C> during POST, right after the memory test but before entering

the System Options Menu screen.

Press <F2> to select “Menu”. This provides access to the menu options “Boot Adapter List” and

“Global Properties”.

The boot adapter list allows you to add or remove boot adapters.

The Global Properties List screen allows you to set the properties for all adapters being controlled.

The following list shows the available options for each setting option.

• Pause when Boot alert Displayed: “[No]” or “[Yes]”

• Boot Information Display Mode: “[Verbose]” or “[Terse]”

• Negotiate with Devices: “[Supported]” or “[All]”

• Video Mode: “[Color]” or “[Monochrome]”

• Disable Integrated RAID: “[No]” or “[Yes]”

• Support Interrupt: “[Hook Interrupt, The Default]” or “[Bypass Interrupt Hook]”

• <Restore Defaults>: Restores the default configuration of the adapters

Press the <Escape> key to exit the Global Properties List and return to the Main menu.

To select the adapter to be configured, use the arrow keys to highlight the adapter then press <Enter>.

The screen clears and the following message is displayed:

Scanning for devices…

The following list shows the available options for each setting category.

• <Device Properties>: Takes you to the Device Properties menu (see below).

• Host SCSI ID: “[0]” to 15]”

• SCSI Bus Scan Order: “[Low to High (0..Max) ]” or “[High to Low (Max..0) ]”

• Removable Media Support: “[None]”, “[Boot Drive Only]”, or “[With Media Installed]”

• CHS (Cylinder Head Sector) Mapping: “[SCSI Plug and Play Mapping]” or “[Alternate CHS

Mapping]”

• Spin up delay (seconds): “[1]” to “[15]”

• Secondary Cluster Server: “[No]” or “[Yes]”

• Termination: “[Auto]”

• <Restore Defaults>: Allows you to restore the default configuration of the SCSI adapter.