User`s manual

30 31MAXDATA PLATINUM 7200 IR M6Platform Description

• Integrated ATI Technologies Inc Radeon 7000 with 16 MB embedded SDRAM

• Fibre Channel Module with a 64-bit PCI-X 100 Mhz interface

• Broadcom BCM5704C Gigabit Ethernet Controller with dual-ports

• Server Management LAN Port (RJ45)

• USB 2.0 Support

- Two ports at the rear of the chassis

- Three ports at the front of the chassis

RAID Support

The PLATINUM 7200 IR Server Board supports on-board RAID through the Intel

IOP332 I/O Processor

with Intel

XScale

Microarchitecture in conjunction with the LSI 53C1030 SCSI controller. The server

platform supports RAID 0, 1, 5, 10, and 50 configurations. A 2 MB flash component and a non-volatile

SRAM store the LSI code and hardware configuration information.

To activate this feature RAID Activation Key must be installed into the holder on the Main Board and

a DDR-2 DIMM must be installed into the RAID DIMM socket. This DIMM serves as memory for

the Intel

IOP332 I/O Processor with Intel

XScale

Microarchitecture, and as a disk cache to store

write data to the drives.

There is also an option to install the RAID Smart Battery. With the Smart Battery, if power to the

Intel

IOP332 I/O Processor with Intel

XScale

Microarchitecture drops below specifications, the

RAID Smart Battery maintains the contents of the DIMM. It keeps the DIMM in self-refresh mode

until power is restored. After power is restored, the data is safely written to drives, maintaining the

integrity of the disk array.