Operation Manual

7MAXDATA PLATINUM 220 Server
2 Server Description
This chapter briefly describes the main features of Intel
®
Server Board S875WP1-E.
Table 1 summarizes the major features of the desktop board.
Table 1. Server Board Features
Feature Description
Processors Support for an Intel
®
Pentium
®
4 processor in an mPGA478 package with
an 800/533/400 MHz system bus
Memory • Four 184-pin DDR SDRAM Dual Inline Memory Module (DIMM)
sockets.
• Support for up to 4 GB Unbuffered ECC system memory.
• Support for single-sided or double-sided DIMMs (DDR266/333/400).
Chipset Intel
®
875P Chipset, consisting of:
• Intel
®
82875P Memory Controller Hub (MCH).
• Intel
®
82801EB I/O Controller Hub (ICH5-R) with support for up to
six High-Speed Universal Serial Bus 2.0 (USB 2.0) ports.
• Intel
®
82802AC 8 megabit Firmware Hub (FWH).
I/O Control SMSC LPC47M172 super I/O controller:
Peripheral Interfaces • Four external USB ports on the back panel with an additional
internal header, which provides support for an optional two USB
ports for front panel support (total possible six USB ports).
• One serial port and one serial header.
• One parallel port.
• Two IDE interfaces with ATA-66/100 support.
• Two Serial ATA connectors.
• One floppy drive interface with support for one drive.
• PS/2 keyboard and mouse ports.
LAN • One Intel
®
82562ET 10/100 Fast Ethernet Controller.
• One Intel
®
82547EI Gigabit Ethernet Controller.
Expansion CapabilitiesOne independent PCI bus (32-Bit/33 MHz, 5V) with three PCI connectors
and two embedded devices:
• 2D/3D graphics controller – ATI Rage XL Video Controller with 8 MB
of SDRAM.
• Serial ATA: SATA-150 controller, Promise Technology PDC20319.
• Accelerated Graphics Port (AGP) connector providing AGP 8x
support.
continued