Operation Manual

12 Server Description
13MAXDATA PLATINUM 220 Server
Table 3. Video Modes
2D Mode Refresh Rate (Hz) S875WP1-E 2D Video Mode Support
8 bpp 16 bpp 24 bpp 32 bpp
640 x 480
60, 72, 75, 90, 100 Supported Supported Supported Supported
800 x 600
60, 70, 75, 90, 100 Supported Supported Supported Supported
1024 x 768
60, 72, 75, 90, 100 Supported Supported Supported Supported
1280 x 1024
43, 60 Supported Supported Supported Supported
1280 x 1024
70, 72 Supported
–
Supported Supported
1600 x 1200
60, 66 Supported Supported Supported Supported
1600 x 1200
76, 85 Supported Supported Supported –
3D Mode Refresh Rate (Hz) S875WP1-E 3D Video Mode Support with Z Buffer Enabled
640 x 480
60, 72, 75, 90, 100 Supported Supported Supported Supported
800 x 600
60, 70, 75, 90, 100 Supported Supported Supported Supported
1024 x 768
60, 72, 75, 90, 100 Supported Supported Supported Supported
1280 x 1024
43, 60, 70, 72 Supported Supported
– –
1600 x 1200
60, 66, 76, 85 Supported
– – –
Super I/O
The SMSC LPC47M172 I/O Controller provides the following features:
• Low pin count (LPC) interface.
• 3.3V operation.
• One serial port and one serial port header.
• One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP)
support.
• Serial IRQ interface compatible with serialized IRQ support for PCI systems.
• PS/2-style mouse and keyboard interfaces.
• Interface for one 1.2 MB, 1.44 MB, or 2.88 MB diskette drive.
• Intelligent power management, including a programmable wake up event interface.
• PCI power management support.
The BIOS Setup program provides configuration options for the I/O controller.
Serial Port
The server board S875WP1-E has one serial port connector and one serial port header. The serial port
A connector is located on the back panel. The serial ports’ NS16C550-compatible UART supports data
transfers at speeds up to 115.2 kB/s with BIOS support.
A DH10 10-pin serial header is available on the Baseboard for an option Serial B port.