User`s manual

22 Hardware Installations and Upgrades
Removing and Installing the Front Bezel
Two front bezel options are available. One is used for the Standard Control Panel and the other is used
with the Local Control Panel. The installation steps are the same for both bezels. If you are installing
a bezel on your chassis, make sure you position it with the control panel area at the top right.
Removing the Front Bezel
1. Unlock the bezel.
2. Pull the bezel out from the chassis.
Figure 14. Removing the Front Bezel
Installing the Front Bezel
1. At each end of the bezel, line up the center notch on the bezel with the center guide on the
rack handles.
2. Push the bezel onto the front of the chassis until it clicks into place.