User`s manual

10 Setting up the System
Local Control Panel
The diagram below shows the features available on the Local Control Panel. The Local Control Panel
is one of two required control options that can be selected.
Figure 3. Local Control Panel
Table 3. Local Control Panel Features
Callout Feature Function
A. USB 2.0 port Allows you to attach a USB component to the front of
the chassis.
B.
LCD display Screen on which system information is displayed.
C. Menu control button, scroll up Scroll up one option at a time.
D. Menu control button, scroll down Scroll down one option at a time.
E. Menu control button, scroll left Move to the previous option.
F. Menu control button, scroll right Move to the previous page.
G. System Identification LED Solid blue indicates system identification is active. No
light indicates system identification is not activated.
H. Power/Sleep LED Continuous green light indicates the system has power
applied to it. Blinking green indicates the system is in
S1 sleep state. No light indicates the power is off / is in
ACPI S4 or S5 state.
I. Power/Sleep button Toggles the system power on/off. Sleep button for ACPI
compatible operating systems.
J. System Status LED Solid green indicates normal operation. Blinking green
indicates degraded performance. Solid amber indicates
a critical or non-recoverable condition. Blinking amber
indicates a non-critical condition. No light indicates
POST is running or the system is off.
L.
K.
NIC 1 activity LED
NIC 2 activity LED
Continuous green light indicates a link between the
system and the network to which it is connected.
Blinking green light indicates network activity.
M. Hard disk drive status LED Random blinking green light indicates hard disk drive
activity. No light indicates no hard disk drive activity is
taking place
N. Reset button Reboots and initializes the system.
O. USB 2.0 port Allows you to attach a USB component to the front of
the chassis.
 












