User`s manual

20 21MAXDATA PLATINUM 100 I M7Server Utilities
20 21MAXDATA PLATINUM 100 I M7Server Utilities
Clearing the CMOS
If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used
to reset the configuration RAM.
1. Power down the system and disconnect the AC power.
2. Open the server.
3. Move the jumper from the normal operation position, at pins 1 and 2 to the CMOS Clear
position, covering pins 2 and 3 as indicated in the following diagram.
Figure 7. Clearing the CMOS
4. Reconnect the AC power, power up the system.
5. When the system begins beeping, power it down and disconnect the AC power.
6. Return the CMOS Clear jumper to the Normal location, covering pins 1 and 2.
7. Close the server chassis.
8. Reconnect the AC power and power up the system.
3
2
Default
CLEAR
CMOS
J1G3
CMOS
CLR
CMOS
CLR
Default
CLEAR
CMOS