Product guide
90 Configuration Software and Utilities
91MAXDATA PLATINUM 90004R Server System
Enable PEF
This option is used to globally enable or disable platform event ltering.
Enable SEL Event Messages for PEF Actions
When this option is checked, each action triggered by a lter generates an event message for the
action. This allows the occurrence of PEF-triggered events to be logged in the System Event Log (if
event logging is enabled).
PEF Startup Delay
This option is used to congure the time in seconds to delay platform event ltering after a system
power up or reset. The range is 60 to 255. The default is 60 seconds.
Alert Startup Delay
This setting is used to congure the time in seconds to delay sending out alerts after a system power
up or reset. The range is from 0 to 255, where 0 indicates no delay.
PEF Action Global Settings
This set of checkboxes globally enables PEF actions that can occur when an event lter is triggered.
Note that for a lter to trigger a particular chassis action (power cycle, reset, power down, or diagnostic
interrupt), the global setting in this view must be enabled and that chassis action must be selected
for that lter (in the event lter settings view; refer to the next section).
The checkboxes allow enabling or disabling of the following:
Power Cycle
If checked, this checkbox globally enables the Power Cycle action when an event lter is triggered.
Reset
If checked, this checkbox globally enables the system reset action when an event lter is triggered.
Power Down
If checked, this checkbox globally enables the system power down action when an event lter is
triggered.
Diagnostic Interrupt
If checked, this checkbox globally enables a diagnostic (non-maskable) interrupt when an event lter
is triggered.
Alert
If checked, this checkbox globally enables alerts when an event lter is triggered.