Product guide

88 Configuration Software and Utilities
89MAXDATA PLATINUM 90004R Server System
Edit User View
Figure 42 shows the view that is displayed when the Edit button is clicked on the User Conguration
main view. Note that any changes made to user settings do not take affect until the next time that
user establishes a session.
If the settings for the anonymous user (the rst user listed) are chosen to edit, the view displayed
is similar to that in Figure 42 except that there is no edit box for the username, since that cannot be
changed.
Figure 42. Edit User Configuration View
Enable User
This checkbox is used to enable a user to attempt to have access to the available channels. Leaving
the checkbox unchecked disables the user, preventing that user from using the channels.
Enter Username
This edit box is used to enter an out-of-band username. For user #1, the anonymous user, the username
cannot be changed (a note on the edit view for user #1 states this also). Usernames can be from 1
to 16 bytes in length, so when entering in ASCII, the password can be from 1 to 16 characters long.
The characters accepted by the SMU for usernames are the ASCII printable characters in the range
0x21 through 0x7e, with the exception of left and right bracket characters (‘[‘ and ‘]’), since those
characters are used for framing packets for terminal mode sessions.
Clear Password
This checkbox is used to clear the password for the user specied. If this checkbox is checked, the
Enter and Verify New Password edit boxes are grayed out.