Product guide

84 Configuration Software and Utilities
85MAXDATA PLATINUM 90004R Server System
New, Edit, and Delete Buttons
If the New button is clicked, a view is displayed to allow conguring of a new LAN destination address;
refer to the following section. If the Edit button is clicked, a view is displayed to allow editing of the
conguration for the currently selected destination IP address (the address whose radio button is
selected in the list). The Delete button is clicked to delete the currently selected destination IP address
(the one whose radio button is selected in the list). Before deleting, you are shown a popup dialog box
to conrm the delete operation. If OK is clicked, the LAN Alerting Conguration view is redisplayed
with the deleted address no longer shown. If no alerts are currently congured, only the New button
is enabled. Note that these buttons only affect the copy of the rmware data internal to the SMU.
Any changes are only written to non-volatile storage in the rmware when the Save button in the last
LAN conguration view is clicked.
New/Edit LAN Alert View
This New/Edit LAN Alert View shown in Figure 39, allows you to congure or change the settings related
to an IP address that is to receive alerts. The view is displayed to congure a new alert destination
or edit an existing one is the same except that when editing an existing alert destination, the current
settings read from the rmware are shown in the view.
Figure 39. New/Edit LAN Alert View
Destination IP Address
This edit box allows a user to enter the IP address to which an alert is to be sent. The IP address
is entered as a dotted notation, e.g., 192.168.0.2. The SMU does not check whether an IP address
entered by you matches one previously entered.