Product guide

82 Configuration Software and Utilities
83MAXDATA PLATINUM 90004R Server System
Figure 38. LAN Alerting Configuration
Enable LAN Alerting
This checkbox is used to enable or disable alerts on the LAN channel.
SNMP Community String
This edit box is used to enter string that is entered in the Community String eld for Platform Event
Traps (PETs). This string can optionally be used to hold a vendor-specic string that is used to provide
the network name identity of the system that generated the event. This string is 18 bytes maximum
and it is typically set to “public”. This string cannot be null.
Alert Settings
When one or more IP addresses are congured as alert destinations, this section shows those
addresses along with the following associated conguration settings:
Gateway IP address for the destination IP address.
Whether alert acknowledge is enabled for the alerts sent to this destination.
The number of times the alert will be retried.
The interval in seconds between retries.
The number of LAN alert destinations is platform specic. For the MAXDATA PLATINUM 9000-4R
Server, the number of LAN alert destinations is 4.