Product guide

52 Configuration Software and Utilities
53MAXDATA PLATINUM 90004R Server System
Table 15. Setup Console Redirection Sub Menu Items
Sub Menu Item Default Value Description
Serial Console
Redirection
Enabled/Disabled When enabled, Console Redirection uses only
COM2. Choosing “Disabled” completely disables
Console Redirection.
Baud Rate 9600
[19.2K]
38.4K
57.6K
115.2K
When Console Redirection is enabled, use the baud
rate specified. When EMP is sharing the COM port
as console redirection, the baud rate must be set to
19.2K to match EMP baud rate.
Flow Control No Flow Control
[CTS/RTS]
CTS/RTS + CD
XON/XOFF
No flow control.
CTS/RTS = Hardware based flow control.
CTS/RTS +CD = Hardware based + Carrier Detect
flow control. When EMP is sharing the COM port as
console redirection, the flow control must be set to
CTS/RTS or CTS/RTS+CD depending on whether a
modem is used.
Xon/Xoff = Software based flow control
Terminal Type PC-ANSI
VT100+
VT-UTF8
Select terminal type. Vt100+ only available when
English selected as the language. VT-UTF8 uses
UNICODE. PC-ANSI is the standard PC-type
terminal.
Serial Port COM2 2F8 IRQ3 Hardcoded – no selection available. Note that if
Console Redirection is enabled, then the Base
I/O address and IRQ selection of Serial Port B
(under Menu Advanced, sub-menu Peripheral
Configuration) should match this Serial Port setting
under the Console Redirection submenu.
Remote Console
Reset
Enabled/Disabled Enables remote reset via escape key sequence;
ESC R ESC r ESC R
ACPI OS Headless
Operation
Disabled
Same as BIOS
Serial Port
Used to pass information about serial redirection to
ACPI OS.
ACPI OS Baud Rate 9600
19.2k
38.4K
57.6k
115.2k
Only available when ACPI OS Headless Operation is
Same as BIOS or Serial Port.
ACPI OS Flow
Control
No Flow Control
CTS/RTS
XON / XOFF
CTS/RTS + CD
Only available when ACPI OS Headless Operation
is Same as BIOS or Serial Port . Same options as
above; these are passed to the OS.
ACPI OS Terminal
Type
PC-ANSI
VT100+
VT-UTF8
Only available when ACPI OS Headless Operation
is Same as BIOS or Serial Port . Same options as
above; these are passed to the OS.