Product guide

20 System Description
21MAXDATA PLATINUM 90004R Server System
Hot-swap Hard Disk Drive Bay
The hot-swap hard disk drive carrier (see Figure 5) is designed to accept 15,000-RPM (and slower)
Ultra320 SCSI technology SCA-type hard disk drives.
The peripheral bay is designed to support Low Voltage Differential (LVD) SCSI disk drives only. Single-
Ended (SE) SCSI devices are not supported in the peripheral bay. SE drives are only supported on
the external SCSI connector.
A
B
OM12933
Figure 5. Hard Disk Drive Carrier
A. Carrier latch
B. Status indicator
The carriers contain light-pipes that allow dual color LED indicators to show thsrough the bezel to
display hard disk drive status as described in Table 4.
Table 4. SCSI Hard Drive LED Details
Feature Description
Green, flashing Indicates the hard drive is active
Yellow/Green flashing Indicates a hard drive fault and hard drive is powered
Yellow/Blank flashing Indicates a hard drive fault and hard drive is not powered
Not illuminated Indicates no hard drive is installed in the bay