Product guide

16 System Description
17MAXDATA PLATINUM 90004R Server System
External Chassis Features
System controls and indicators are located in several places on the chassis as follows:
• Chassis front:
– Front panel: Front panel switches and LEDs
– Peripheral bay: Hard disk drive LEDs
– Processor/memory module: Subsystem serviceability LEDs
• Chassis back:
– Power supply modules (See Power Subsystem for details)
– Hot-plug Indicator Board (HPIB)
• Chassis top:
– I/O subsystem
– Fan bay (See Cooling Subsystem for details)
Each of these areas is discussed in this section.
Chassis Front
Figure 2 shows the front view of the chassis with the snap-on bezel in place. The bezel provides
access to the front panel board and the peripheral bay.
OM12885
A
B
C
Figure 2. Chassis Front View
A. Bezel
B. Front Panel
C. Peripheral Bay
Front Panel
The front panel is located to the right of the processor/memory subsystem and provides user interface
for system management via switches and status indicatosr LEDs. The front panel also contains the
speaker. Figure 3 shows the control buttons and status indicators on the front panel. Table 3 describes
their features.