Product guide

14 15MAXDATA PLATINUM 90004R Server System
1 System Description
Introduction
The MAXDATA PLATINUM 9000-4R as shown in Figure 1 is a compact, high-density rack-mount
server system with support for one to four Intel
®
Itanium
®
2 processors and 32-GB DDR SDRAM
memory. The system is based on the Intel S870BN4 board set and the Intel
®
E8870 chipset. The
system supports hot-plug PCI and PCI-X add-in cards; hot-swap, redundant power supply modules;
hot-swap, redundant cooling fans; and hot-swap hard disk drives. The system also provides interlock
status LEDs for critical system interconnects. The system supports Symmetric Multiprocessing (SMP)
and a variety of operating systems. Table 1 presents an overview of the server system’s physical
characteristics.
OM12884
Figure 1. MAXDATA PLATINUM 9000-4R Server Front View
Table 1. Server Physical Specications
Characteristic Specification
Height 178 mm (6.9 inches, 4U)
Width 445 mm (17.5 inches)
Depth 711 mm (28.0 inches)
Weight (max.) 48 kg (106 lbs)1
Required front clearance 76 mm cm (3 inches)
Required rear clearance 152 mm (6 inches)
Required side clearance 25 mm (1 inch)
Heat Dissipation 1500 W (5,100 BTU/hr)
1. The system weight listed above is an estimate for a fully configured system and will vary depending on the number of
peripheral devices and add-in cards as well as the number of processors and DIMMs installed in the system.