Product guide
144 Hotswapping System Components
145MAXDATA PLATINUM 90004R Server System
A
B
C
OM12952
D
Figure 67. Installing a Hot-plug PCI Add-in Card
12. Connect any required cabling to the PCI add-in board.
13. Close the back top cover.
14. If your server is operating, use the operating system or GUI application to power up the PCI
slot into which you installed the PCI card. NOTE: the attention switch on the back of the
chassis will not be supported until a Post Platform Release BIOS. Please check the BIOS
release notes of the BIOS installed on the system to verify whether using the attention button
to initiate the slot power up is supported.
15. If the system is installed in an equipment rack, push the system back into place.