Product guide
12 Part I: User’s Guide
13MAXDATA PLATINUM 90004R Server System
!
WARNING – POWER CORD RATING
Do not attempt to modify or use an AC power cord that is not the exact type required. You must use
a power cord that meets the following criteria:
• Rating: For U.S./Canada cords must be UL Listed/CSA Certied, 16/3, 75C type, VW-1, SJT/SVT,
with NEMA 5-15P or NEMA 6-15P attachment plug and IEC 320 C13 input power connector
rated 15 amps. For outside U.S./Canada cords must be exible harmonized (<HAR>) rated 250
V, 1.0 mm minimum conductor size with IEC 320 C13 input power connector and rated for no
less than 10 amps.
• AC Attachment Connector, wall outlet end for outside U.S./Canada: The AC wall attachment
plug should be a three conductor grounding type, rated at 125 V, 15 amps and must be for
the configuration of the specific region or country. The AC wall attachment plug must bear at
least an accepted safety agency certification mark for the specific region or country.
• Input Power Connector, server end: The connectors that plug into the AC receptacles on the
server must be an IEC 320, sheet C13, type female connector and are rated for 125 V/250 V,
15 A.
• Cord length and flexibility: Cords must be less than 4.5 meters (14.76 feet) long.
!
CAUTION
Temperature: The range of temperatures in which the server operates when installed in an equipment
rack, must not go below 10 °C (50 °F) or rise above 35 °C (95 °F). Extreme fluctuations in temperature
can cause a variety of problems in your server.
Ventilation: The equipment rack must provide sufficient airflow to the front of the server to maintain
proper cooling. The rack must also include ventilation sufficient to exhaust a maximum of 1500 W
(5,100 BTU/hr) for the server. The rack selected and the ventilation provided must be suitable to the
environment in which the server will be used.