Product guide
104 Configuration Software and Utilities
105MAXDATA PLATINUM 90004R Server System
Edit Page Destination View
The menu shown in Figure 53 allows a user to congure or modify the settings for a page destination.
Note that not all settings displayed in the page destination view can be changed; the ones that cannot
be changed are not shown in the settings view. The settings that cannot be changed are platform-
dependent, so the view below would correspond to a particular type of server.
Figure 53. Edit Page Destination Menu
General Settings
These settings are used to congure modem settings for a page destination. Each setting is described
below.
Dial String
This drop-down list shows all current list of destination dial strings (including ones not congured).
Whatever string is showing in this box when the OK button is clicked is the one associated with this
page destination.
Flow Control
This setting sets how the ow of data is controlled. Available choices are No Flow Control, CTS/RTS
(hardware handshake), and XON/XOFF.
Baud Rate
This setting determines the maximum rate in bits per second at which the data can be transmitted
through the serial port. Available baud rates are 9600, 19200, 38400, 57600, and 115200.
Stop Bits
The number of stop bits to use when transmitting page data. The choices are 1 and 2 stop bits.
Data Bits
The number of data bits to use when transmitting page data. The choices are 7 and 8 data bits.
Parity
Shows the parity type that is used when transmitting the page data. The choices are None, Odd,
and Even.