Operation Manual

Modules & Options
3.75G/HSPA Module 7 - 49
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see “Function/Hot
Key Indicators” on page 1 - 10) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA module is powered on, the on-screen indicator will briefly be
displayed. Make sure you install the drivers in the order indicated in
Table , on page 4
- 3
. Note that exiting the application does NOT turn off the 3.75G/HSPA mod-
ule.
• Wireless Manager - See “Wireless Manager Installation” on page 7 - 51 for
driver installation information and “Wireless Manager Application” on page 7
- 52 for instructions on using Wireless Manager.

3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules
DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.