Operation Manual

Modules & Options
7 - 34 Bluetooth Module
7
Bluetooth Module
If your purchase option includes the Combination Wireless LAN & V3.0 Blue-
tooth module (either Intel® or 3rd Party) then install the driver as instructed over-
leaf.
Use the Fn + F12 key combination to toggle power to the Bluetooth module
(see
“Function/Hot Key Indicators” on page 1 - 10 ) . When the Bluetooth module is
powered on, the LED will be orange and the
on-screen indicator will
briefly be displayed.
•For Intel Bluetooth combo modules see the installation procedure see “Intel
Bluetooth Combo Driver Installation” on page 7 - 35 and “Standard Bluetooth
Configuration in Windows 7” on page 7 - 36.
•For 3rd party Bluetooth combo modules see the installation procedure see
“3rd Party Bluetooth Combo Driver Installation” on page 7 - 40 and “3rd
Party Bluetooth & WLAN Combo Settings” on page 7 - 41.

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F12 key com-
bination to toggle power to
the Bluetooth module, and
check the LED indicator to
see if the module is pow-
ered on or not (see Table 1
- 3, on page 1 - 10/ Table 1
- 1, on page 1 - 7).

Bluetooth Data Transfer
Note that the transfer of data between the computer and a Bluetooth enabled device is supported in
one direction only (simultaneous data transfer is not supported). Therefore if you are copying a
file from your computer to a Bluetooth enabled device, you will not be able to copy a file from the Blue-
tooth enabled device to your computer until the file transfer process from the computer has been com-
pleted.