Service manual

Belinea 101910
z Factory2 Adjustment
This page only visible in factory mode
AUTO BURN:
Use the chip set internal pattern for hot
running monitor panel and inverter.
AUTO COLOR:
Perform Auto Balance measurement.
AUTO COLOR 1:
Perform Auto Balance measurement
by chip set internal signal. And
reference these values to initial all
other color temperature detail
parameters.
COLOR UPDATE:
Force presently R,G,B offset and gain
parameters update to currently
temperature memory address.
FACTORY RESET:
Recall to factory setting and power off
immediately.
VERSION:
Display F/W version and panel vender
and DDC serial no.
MAXDATA Servicemanual 111908 Page 32
- Confidential -