Service manual

Belinea 101910
z Volume Menu
When user press the Left or Right keys
under none OSD status will trigger this
menu appear for Volume adjust. Use the
Left & Right keys adjust the volume
value, and use the Up & Down keys
switch the Mute status. This menu will
display about 45 seconds.
Auto Configuration
When user press the select/Auto
key under none OSD status will
trigger this dialog appears and
perform Auto Configuration
procedure.
z Mode Information
When Display timing changed, this
dialog will appear about 5 seconds.
And this feature only enable when
“Information” indicates On in
OSD’s other page of main menu.
z No Signal
When user not support the video
signal from the cable this dialog will
appear about 20 seconds. And then
enter the Sleep mode. One special
case was in factory mode, the
display time length will become 5
seconds for testing the power
consumer.
MAXDATA Servicemanual 111908 Page 27
- Confidential -