User manual

MaxComm Co., Ltd

Portable SMS Printer User Manual

Please read this manual carefully before fixing the terminal.

Don’t put terminal in rain or wet place.

The terminal only use valid SIM card. SIM card will be offered by server department.

Don’t open shell personal. If terminal has any question, please touch the dealer.

Electric outlet should be fixed nearby the terminal in order to use expediently.

Appendix C: Question and Solution

Question 1: Switch the terminal on, but it can’t work.

Reason: The battery capability is so low that the terminal can’t work.

Solution: Please use power adapter to charge the battery for a while and then

switch the terminal on again.

Question 2: The battery is not chargeable.

Reason: The Battery or the charger is bad.

Solution: Replace the battery or charger by another one.

Question 3: Signal weak or no signal

Reason: Use terminal in GSM Signal blind area. For example, the terminal is

installed nearby high building or basement where wireless electric wave can’t

transmit enough.

Solution: Avoid this period using it. Move the antenna to some place where the

signal is strong enough.

Question 4: There is cacophony or reecho while calling.

Reason:

The relay line of net is bad that belongs to area question.

The calling line is not good in some area.

Solution: Hang up and dial again. Maybe the relay line will change a better one.

Question 5: Outgoing or incoming call is normal, but can’t send SMS.

Reason: SMS service centre number is wrong.

Solution: Reset the right SMS service centre number.

Question 6: Notice there is no card.