Instructions / Assembly

Assembly and Installation Steps
Open the it.
Step 1
Open the it.
Step 2
Lock together
Step 4
Lock together
Step 3
Lock together
Step 5
Connect all white wires (-) from the arm together, and connect
all black wires (+) from the arm together. Do not mix the black
and white wires. There are two same main wires, they are
thicker than the black and white wires. Connect black wires of
the arms together with one of the main wire. Connect white
wires of the arms together with the other main wire. The wires
connection is finished.
Step 5
Lock together
Step 6
1. Lock the crossbar to the junction box of the ceiling by using 2 pcs
of 5/32 screws in the accessories bag.
2. Connect the wires. The hot/positive (+) wire is the one which has writing
on it. The negative (-) wire is the one which has no writing.
3. Cover the celing canopy and attach the screws to the canopy.
Step 8
Lock together
Step 7
Put it down
Step 9
Install 10 E12 bulbs
(Not included).
Step 10
Installation
of crystal
strings
Step 11
6#
5#
1#
2#
4#
3#
7#
8#
9#
10#
2/3