Instructions / Assembly

Light Bulb
(Not included)
E26
( Rated 110-130V/60Hz, bulb
60
W maximum.)
Warning:
If any special control devices are used
with this fixture, follow the instructions carefully
to assure full compliance with N.E.C.requirements.
If there are any questions, contact a qualified
electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to
the state of California to cause cancer and birth
defects or other reproductive harm. Do not place
the product in your mouth. Wash your hands after
handling this product.
Caution:
It is highly recommended to get an
electrician to install this light. Please make sure
to turn the electricity off at the main circuit
breaker before beginning installation. All glass
is fragile.Use care when handling glass
component(s)and/or lamp(s).
L
N
PARTS INCLUDED
Part Description
QTY
Code
Please read all instructions carefully. Before you
proceed to install, make sure that the power supply
is turned off and remains off until installation is
completed.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to
connect the electrical circuit.
CAUTION: Risk of fire
A
B
C
D
E
F
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems, please send us
an email to [e-mail] or call us at
870-949-8466. We will do everything possible to make
you completely satisfied with your purchase.
Product reviews help future customers to make their
purchase decision. You are encouraged to share your
experience by leaving a short product review on the
platform where you bought this product.
Thank you!
Zgear Team
Decorative Nut
1 PCS
Iron Square Box
Secure the Oval frame
with a nut
A
B
C
D
E
F
G
Step 1
Step 2
Fix the lamp on
the wall with
nuts.
Step 3
Install the
glass
Step 4
Install E26 bulb
(not included).
Step 5
1 PCS
2 PCS
1 PCS
1 PCS
1 PCS
Glass
E26 Lock Ring
Lamp Arm
G
1 PCS
Oval Frame
Mounting Bracket
2A.
Lock the
crossbar to the junction
box of
the ceiling
by
using 2 pcs of
5/32 screws in the accessories
bag.
2B.Connect the wires. The hot/positive wire (+) has an “L”
label on it. The other one is the negative wire (-). And the
bare cooper is the ground wire.
2
C.Fix the cross bar to the wall with
Crossbar Screws