Instructions / Assembly

PARTS INCLUDED
Part Description QTY
Code
Light Bulb
(Not included)
E12
A
B
C
E
D
Mounting Bracket
Ceiling Plate
Cover nut
1
1
2
1
Warning: If any special control devices are used
with this fixture, follow the instructions carefully
to assure full compliance with N.E.C.requirements.
If there are any questions, contact a qualified
electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to
the state of California to cause cancer and birth
defects or other reproductive harm. Do not place
the product in your mouth. Wash your hands after
handling this product.
Caution: It is highly recommended to get an
electrician to install this light. Please make sure
to turn the electricity off at the main circuit
breaker before beginning installation. All glass
is fragile.Use care when handling glass
component(s)and/or lamp(s).
Assembly & Installation Instructions
N
L
Please read all instructions carefully. Before you
proceed to install, make sure that the power supply
is turned off and remains off until installation is
completed.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to
connect the electrical circuit.
CAUTION: Risk of fire
Dear Customer:
Thank you for your business!
If you have any questions or problems,please send us
an email to [e-mail] or call us at
469-312-6428. We will do everything possible to make
you completely satisfied with your purchase.
Product reviews help future customers to make their
purchase decision. You are encouraged to share your
experience by leaving a short product review on the
platform where you bought this product.
Thank you!
Zgear Team
H
L
N
A
1A. Lock the crossbar to the junction box of the
ceiling by using 2 pcs
of 5/32 screws in the accessories bag.
1B.Connect the wires. The hot/positive wire (+) has
an (L)label on it. The other one is the negative
wire (-). And the bare cooper is the ground wire.
1C.Attach the canopy to the ceiling with screws
Crystal ball
Main frame
Turn the bends 90
degrees vertically
and screw them
together
Screw together
B
C
D
E
72
Screw together
Install 8 E12 bulbs
(Not included).
( Rated 110-130V/60Hz, bulb 40W-60W maximum.)
Step 1
Step 2
Step 3
Step 4
Step 5