Instructions / Assembly

Warning: If any special control devices are used
with this fixture, follow the instructions carefully
to assure full compliance with N.E.C.requirements.
If there are any questions, contact a qualified
electric contractor.
Warning: California Residents Proposition 65
This product contains lead, a chemical known to
the state of California to cause cancer and birth
defects or other reproductive harm. Do not place
the product in your mouth. Wash your hands after
handling this product.
Caution: It is highly recommended to get an
electrician to install this light. Please make sure
to turn the electricity off at the main circuit
breaker before beginning installation. All glass
is fragile.Use care when handling glass
component(s)and/or lamp(s).
N
L
PARTS INCLUDED
Part Description
QTY
Code
Assembly & Installation Instructions
Dear Customer:
Thank you for your business!
If you have any questions or problems,please send us
an email to [e-mail] or call us at
469-312-6428. We will do everything possible to make
you completely satisfied with your purchase.
Product reviews help future customers to make their
purchase decision. You are encouraged to share your
experience by leaving a short product review on the
platform where you bought this product.
Thank you!
Zgear Team
Please read all instructions carefully. Before you
proceed to install, make sure that the power supply
is turned off and remains off until installation is
completed.
WIRE CONNECTION DIAGRAM
Wires meeting safety standards are required to
connect the electrical circuit.
CAUTION: Risk of fire
Light Bulb
(Not included)
( Rated 110-130V/60Hz, bulb 40W maximum.)
Lamp Arm
A
B
C
D
E
Mounting Bracket
Canopy
Cover Nut
1
1
Crystal Diamond
2
1
1
F
G
Metal Ring
1
1
1/1
GU10
A
B
C
E
F
G
H
H
3
Cover Nut
Round Tube
1A. Lock the crossbar to the junction box of the ceiling
by using 2 pcs
of 5/32 screws in the accessories bag.
1B. Connect the wires. The black wire is the positive
wire (+). The white wire is the negative wire (-). Bare
copper is the ground wire.
1C.Attach the canopy to the ceiling with screws
Step 2
Step 1
Screw together
Step 3
Step 4
Unscrew the
round tube,
install the bulb,
and then tighten
the round tube.
Install 5 GU10 Light
bulbs (Not included).
Step 5
Put the crystal
diamond inside
the metal ring
Step 6
Step 7
Screw together