User's Manual

56
RIOTRONIC X+
User Manual
7.3.5. Copy history
History log is created in a hidden part of memory. It cannot be changed or erased. With this
option the content of this hidden log with all information important for user is exported to
.xml file and saved on USB flash memory.
7.4. Settings
Settings menu is to change setting of Blaster listed below.
Figure 64. Settings menu
7.4.1. Remote type
There are two methods of connection with Remote control device: using wireless modem
(WiFi or RF) or RS485 cable. Preferred connection type can be set here.
7.4.2. Transfer settings
Transfer method can be chosen between wireless (NFC) and wired (USB). This setting affects
only to sending data to Blaster. Receiving is always by NFC.
Figure 65. Transfer settings