User's Manual

20
RIOTRONIC X+
User Manual
Figure 15. PPV and clearance prediction
Defining a clearance zone is also needed for safety consideration.
3.2.2. Detonator testing
Every RIOTRONIC X+ detonator should be tested before being used. The RIOTRONIC X+
detonator should be attached directly to the RIOTRONIC X+ Logger (Figure 16) before the
testing option is chosen. If it is not done like this, the user will get a “no response” error
screen.
Figure 16. Connection between a RIOTRONIC+ detonator and RIOTRONIC X+ Logger
Test one det is to perform self-testing procedure in single detonator. One detonator only
should be connected before initiating this test.
Figure 17. Test one det results