User's Manual

48
RIOTRONIC X+
User Manual
Figure 45. USB and charge sockets
7.2.5. Communication antenna socket
Blaster is equipped with remote communication modem. Depending on version it could be
WiFi modem or RF modem (868 MHz or 915 MHz). Socket for remote communication antenna
is placed on the left side of front panel, just to the right of USB1 socket.
Appropriate antenna should be connected before remote communication is started.
7.2.6. Firing line terminals
Firing line terminals are placed at the right side of front panel. They are used to connect the
detonators through two-wire firing line.
Figure 46. Firing line terminals
7.2.7. NFC antenna
Blaster is equipped with NFC communication antenna. NFC is used to communicate with
Logger and read RFID card to blast authorization. NFC antenna is placed at the left side of
front panel, just above the CHARGE key.