User's Manual

14
RIOTRONIC X+
User Manual
Figure 7. Safety key (RFID card)
2.2.2. Bus-line
The bus line (Figure 8) is used to connect separate RIOTRONIC X+ detonators as a network.
Additionally, the RIOTRONIC X+ Logger can be used to program RIOTRONIC X+ detonators
using this line and the RIOTRONIC X+ Blaster needs this line to charge and fire the
detonators.
Figure 8. Bus line (With and without reel)
2.2.3. Charger
This equipment is used to charge the RIOTRONIC X+ Blaster (Figure 9).
Figure 9. RIOTRONIC X+ Blaster Charger
2.2.4. Replacement connector
If the bus-line or a RIOTRONIC X+ detonator wire is broken, use a replacement connector
(Figure 10.) to reconnect the broken lines.