Use and Care Manual

10
MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
► CHECK OIL LEVEL.
► DRAIN CONDENSATION FROM
AIR RECEIVER.
► CHECK FOR ANY UNUSUAL NOISE
OR VIBRATION.
► BE SURE ALL NUTS AND
BOLTS ARE TIGHT.
WEEKLY
► TURN OFF POWER. C
LEAN DUST AND FOREIGN MATTER
FROM CYLINDER HEAD, MOTOR, FAN BLADES, INTER-
COOLER AND AIR RECEIVER.
► CLEAN AIR FILTER
BY OPENING AIR FILTER, REMOVING
FILTER ELEMENT AND CLEANING IT THOROUGHLY
.
► WORN
FILTERS
SHOULD
BE
REPLACED.
► CHECK
V-BELTS
FOR
WEAR.
MONTHLY
► INSPECT UNIT FOR LEAKS.
► T
IGHTEN JOINTS
IF LEAKS ARE OBSERVED.
► CHECK V-BELTS
FOR PROPER TENSION.
► CHECK COMPRESSOR PULLEY AND
MOTOR SHEAVE ARE
ALIGNED AND SECURELY FASTENED.
QUARTERLY OR 300 HOURS (Whichever comes rst)
► INSPECT THE AIR RECEIVER FOR
CORROSION OR OTHER
DAMAGE.
► CHANGE COMPRESSOR
OIL.
► REPLACE AIR FILTER (
MORE OFTEN IF COMPRESSOR IS
USED NEAR PAINT SPRAYING OPERATIONS OR IN DUSTY
ENVIRONMENTS).