Product Manual

10
MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
► CHECK OIL LEVEL.
► D
RAIN CONDENSATION FROM AIR RECEIVER.
► C
HECK FOR ANY UNUSUAL NOISE OR VIBRATION.
► B
E SURE ALL NUTS AND BOLTS ARE TIGHT.
WEEKLY
► T
URN OFF POWER. CLEAN DUST AND FOREIGN MATTER
FROM CYLINDER HEAD, MOTOR, FAN BLADES, INTER-
COOLER AND AIR RECEIVER.
► C
LEAN AIR FILTER BY OPENING AIR FILTER, REMOVING
FILTER ELEMENT AND CLEANING IT THOROUGHLY WITH
SOAPY WATER. RINSE THOROUGHLY AND ALLOW TO DRY
COMPLETELY BEFORE ASSEMBLY.
► W
ORN FILTERS SHOULD BE REPLACED.
► C
HECK V-BELTS FOR WEAR.
MONTHLY
► I
NSPECT UNIT FOR LEAKS.
► T
IGHTEN JOINTS IF LEAKS ARE OBSERVED.
► C
HECK V-BELTS FOR PROPER TENSION.
► C
HECK COMPRESSOR PULLEY AND MOTOR SHEAVE ARE
ALIGNED AND SECURELY FASTENED.
QUARTERLY OR 300 HOURS (Whichever comes rst)
► I
NSPECT THE AIR RECEIVER FOR CORROSION OR OTHER
DAMAGE.
► C
HANGE COMPRESSOR OIL.
► R
EPLACE AIR FILTER (MORE OFTEN IF COMPRESSOR IS
USED NEAR PAINT SPRAYING OPERATIONS OR IN DUSTY
ENVIRONMENTS).