Use and Care Manual

7
INSTALLATION & OPERATION
COMPRESSOR LUBRICATION ... CONTINUED
Eagle compressor oil is a non-detergent mineral oil formulated with ad-
ditives to help minimize carbon build-up, increase ring life and reduce oil
consumption, for use at ambient temperatures of 0° to 30°C
(32°F - 86°F).
OTHER APPROVED OILS.
Regular mineral oils can also be used in Wood Industries, Inc. compressors.
Always use 
AMBIENT TEMPERATURES AT
POINT OF OPERATION
SAE VISCOSITY ISO VISCOSITY
-16°C TO 0°C (3.2°F - 32°F) SAE 10W ISO 32
1°C TO 26°C (33.8°F - 78.8°F) SAE 20W ISO 68
ABOVE 27°C (80.6°F) SAE 30W ISO 100
FILLING THE COMPRESSOR WITH OIL
1) 
2) Slowly pour the proper oil into the pump crankcase.
3) Always keep oil level in the middle of the sight glass.
OIL CHANGES
CHANGE OIL EVERY 300 HOURS OR 3 MONTHS
WHICHEVER COMES FIRST.
1) Remove the oil drain plug. Allow oil to drain completely.
2) Replace the oil drain plug.
3) 
INITIAL OIL CHANGE DUE AT 100 HOURS.
ENGINE LUBRICATION (If Engine Driven)
Check engine Owner’s manual for lubrication and maintenance
requirements.