Product Manual

10
MAINTENANCE SCHEDULE
DAILY OR BEFORE EACH USE
► CHECK OIL LEVEL.
► DRAIN CONDENSATION
FROM AIR RECEIVER.
► CHECK FOR ANY UNUSUAL
NOISE OR VIBRATION.
► BE SURE ALL NUTS
AND BOLTS ARE TIGHT.
WEEKLY
► TURN OFF POWER
. CLEAN DUST AND FOREIGN MATTER
FROM CYLINDER HEAD, MOTOR, FAN BLADES, INTER-
COOLER AND AIR RECEIVER.
► CLEAN AIR FILTER
BY OPENING AIR FILTER, REMOVING
FILTER ELEMENT AND CLEANING IT THOROUGHLY WITH
SOAPY WATER. RINSE THOROUGHLY AND ALLOW TO DRY
COMPLETELY BEFORE ASSEMBLY.
► WORN FILTERS
SHOULD BE REPLACED.
► CHECK V-BELTS
FOR WEAR.
MONTHLY
► INSPECT UNIT FOR LEAKS
.
► TIGHTEN JOINTS
IF LEAKS ARE OBSERVED.
► CHECK V-BELTS
FOR PROPER TENSION.
► CHECK COMPRESSOR PULLEY AND
MOTOR SHEAVE ARE
ALIGNED AND SECURELY FASTENED.
QUARTERLY OR 300 HOURS (Whichever comes rst)
► INSPECT THE AIR RECEIVER
FOR CORROSION OR OTHER
DAMAGE.
► CHANGE COMPRESSOR
OIL.
► REPLACE AIR FILTER
(MORE OFTEN IF COMPRESSOR IS
USED NEAR PAINT SPRAYING OPERATIONS OR IN DUSTY
ENVIRONMENTS).