Specifications

ENGLISH
13
Tighten screw M5×6.
r Reconnect air supply.
Trigger lock
dial
Trigger
(LOCK)
(UNLOCK)
The tool is equipped with a trigger lock
mechanism. Push and rotate the trigger LOCK to
the trigger UNLOCK position before driving
staples.
ALWAYS disconnect air supply before
clearing jammed fastener.
TRIGGER LOCK MECHANISM
CLEARING JAMMED STAPLES
WARNING
Staple removal lever
q Take out the staples from the inside of the
magazine.
w Release the staple removal lever and open the
door.
e Remove staples that are jammed inside the
nose by using a punch or slotted screw driver.
r After removing the staples. Close the door and
the staple removal lever.