Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 7
Figure 1- 3 SFX 210x Rear Panel connectors
Connector Description
Universal AC Power The Alternating Current (AC) inlet is the main power disconnect. The power cord
connector is used to provide AC power to the satellite receiver. The power
requirements for this equipment are quite flexible, with an acceptable voltage range of
100 to 240 VAC at 50 or 60 Hz.
K (Keyboard) & M
(Mouse) Ports
These are standard PS/2 type keyboard and mouse connectors, used when keyboard
and mouse are required for the console.
S-VIDEO & TV Ports These connectors provide baseband composite PAL or NTSC video output and audio
for TV applications (SFX3100 series only).
TERMINAL Interface Port This is a 9-pin RS-232 (DTE) DE-9P (male) connector. It is used as a bi-directional
low speed asynchronous data port for the Terminal Interface at 9600 baud. The
pinouts for this port are as follows:
PIN Acronym Reference
1 DCD Data Carrier Detect
2 RD Receive Data
3 TD Transmit Data
4 DTR Data Terminal Ready
5 GND Ground
6 DSR Data Set Ready
7 RTS Request To Send
8 CTS Clear To Send
9 RI Ring Indicator
VIDEO SVGA Port A standard SVGA output, used when a monitor is required for the console.
USBx Ports (4) These are bi-directional USB 2.0 ports, available for future applications.
Universal
AC Power
DVB-ASI Port
(optional)
10/100 BaseT
Ethernet Port
L-Band
Input
from LNB
Keyboard (K) &
Mouse (M) Port
SVGA video Port
(Monitor)
TV Port
Composite
10/100/1000
BaseT
Ethernet Port
Multiple USB
ports
(future
expansion)
PCI slot
(optional)
Power On
Button
Sync Port
RS-422
Optional Conditional
Access: CAM or
SmartCard
Terminal
Interface Port
(RS-232)