Operation Manual

SFX SERIES USER’S GUIDE

Rev 2.2 77

Edit Field Description

Edit

Delete

Restore

• Click this button to edit the selected filter.

• If you wish to delete a filter from the Current Filter list, then select the filter using the radio

buttons on the left side and click on Delete. The action is immediate.

• Click this button to restore the filter set to the Factory Defaults.

> Click this arrow to move the selected filter or filters from left to right. (e.g.. from the Unused

Filters box to the Show if Contains box.

>> Click this arrow to move all the filters from left to right. (e.g. from the Unused Filters box to the

Show if Contains box.

< Click this arrow to move the selected filter or filters from right to left. (e.g. from the Omit if

Contains to the Show if Contains box.

<< Click this arrow to move all the filters from right to left. (e.g. from the Omit if Contains to the

Show if Contains box.

Download Logs Use this button to select the log file or files to be downloaded. The options are: Current View;

This Entire Log with Filters; This Entire Log without Filters; All Logs with Filters; or All Logs

without Filters.

Logs may be saved as a single file or multiple files. For multiple files, one file is created for each

dated log file, but all log files are assembled in one tarball.

Logs are saved as Plain Text only.

Save Press this button to save the selected log combination. A pop up box will allow you to specify

where on your computer you would like the log to be saved.

Figure 2- 48 Edit Filter Window

The following fields can be edited on the Logging Preferences Edit page:

Edit Field Description

Minimum Log Level This field selects the type of events that are to be logged, according to the following 5 priority

levels (from lowest to highest):

Debug

– debug level messages that come primarily from 3

party applications that are installed

on the receiver.

Info

– informational messages, including the RF metrics information, which is shown at the

bottom of the screen. The RF Metrics logging interval can be configured through the Web GUI,