Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 55
Figure 2- 27 Source NAT Table Page
The columns in the Source NAT Table page are described under the Edit Source NAT Table page (Figure 2- 28).
Aside from the Common Menu Items, the following menu items are available:
Menu Item Description
Show SNAT Table Selecting this button will always return you back to the Source NAT Table page, as shown in
Figure 2- 27.
Edit SNAT Table Selecting this button will show the Edit Source NAT page, Figure 2- 28.
Figure 2- 28 Edit Source NAT Table Page
NOTE : New
SNAT rules
committed to
the table (when
Send Update is
pressed) may
not take
immediate
effect if the
applicable IP
data stream is
in progress. A
suitable period
of no data
activity for that
IP stream (as
determined by
Linux) may
need to take
place first
before the new
rule applies.
You must press
Send Update
for any changes
to take effect