Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 39
Column/Field Description
PID # This is the numeric value for the PID, displayed in decimal and hexadecimal in brackets.
Enabled These check boxes authorize each individual PID to be demultiplexed by the receiver. Overall,
the NET Port(s) enabled check box (see above) has to be turned on for these check boxes to
have any effect.
Encapsulation Shows the selected encapsulation form for this PID. Options are MPE or ULE.
Route to ASI Port Only with the ASI Port Option (not shown here). See Appendix F for details.
Description This is a text description of the PID, as entered when the PID was defined using the Add New
PID Definition or Edit Selected menu items.
Figure 2- 13 Net PID List Page
Aside from the Common Menu Items, the following menu items are available:
Menu Item Description
NET PIDs Selecting this button will always return you back to the Net PID List page, as shown in the
example in Figure 2- 13. All PIDs currently assigned as type Net will be displayed.
ASYNC PIDs Selecting this button will always return you back to the Async PID List, as shown in the example
in Figure 2- 14. All PIDs currently assigned as type Async will be displayed.
SYNC PIDs Selecting this button will always return you back to the Sync PID List, as shown in the example
in Figure 2- 15. All PIDs currently assigned as type Sync will be displayed.
Other PIDs Selecting this button will always return you back to the Other PID List, as shown in the example
in Figure 2- 16. All PIDs currently assigned as type Other will be displayed.
MPEG over IP Selecting this button will always return you back to the MPEGTS PID List, as shown in the
example in Figure 2- 17. All PIDs currently assigned as type MPEG over IP will be displayed
ASI Port Only with ASI Port option, see Appendix F
Edit Selected Selecting this button will enter the Edit PID Definition page (see example in Figure 2- 19) for the
NOTE:
When you
select the
Delete Selected
or Delete ALL
buttons, you
may be
disabling data
services at the
output of the
receiver, if the
PID(s) and port
are enabled.