Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 27
With FlexKey Option Only Back to Main
Cancel Changes
Send Update
Back to Main Ping Utility
PING
Stop PING
Back to Main
RESTART
SHUTDOWN
Restart
TCP/UDP Port Registry Back to Main
Back to Main
Traceroute
Stop Traceroute
Traceroute Utility
Back to Main
Cancel Upgrade
Send Upgrade
Upgrade
The Action of the Mouse
A standard web browser interface is used to access and change the content of pages in the Web GUI. In general,
moving the mouse over an active icon or menu item and clicking the left mouse button will select that item. In the case
of data entry into tables etc., simply place the mouse cursor in the field you wish to edit and left click to select the field
for data entry.
Common Menu Items
Referring to the menu hierarchy in the previous section, you can see at the lowest level that there are three menu
items that repeat throughout the submenus. These three items perform the following:
Menu Item Description
Back to Main No matter where you are, selecting this button will always return you back to the Main Menu
page, as shown in Figure 2- 1.
Cancel Changes When working in an edit page, selecting this button will cancel any edits that have been made
on that edit page and return you back to the display page.
Send Update
(or an action)
This third button is always an action button associated with sending of updates/edits to the
receiver. Selecting this button will always result in some immediate action taken by the
receiver. Usually, the action will be an update to the receiver’s configuration.
Drop-down Selection Boxes
Many edit pages utilize drop-down selection boxes, as shown in the example in Figure 2- 2. Clicking on the arrow to
the right of the current selection in the box causes the current selection, and all other available items to be shown. The
dotted line is used to separate the current selection from all items available. If you move the mouse over the item you
are interested in and click the left mouse button the item will be selected as the new current selection. Clicking on the
current selection or the dotted line always retains the current selection (ie. There will be no change in the current
selection).