Operation Manual

SFX SERIES USER’S GUIDE
Rev 2.2 124
Figure D- 4 Conditional Access Configuration Page
Aside from the Common Menu Items, the following menu items are available:
Menu Item Description
Show Selecting this button will always return you back to the Conditional Access Configuration page,
as shown in Figure D- 4. The current configuration as entered under the configuration edit page
is always displayed here.
Edit Selecting this button will enter the Conditional Access Configuration Edit page, as shown in
Figure D- 5. The edit fields on this page are explained below the page. Note the warning
message on the page - Send Update will cause the receiver to reconfigure the CA Module
accordingly, thus interrupting data services.
The display fields in the Conditional Access Page have the same meaning as described for Figure D- 5 Edit
Conditional Access Configuration page, except for the following:
Column/Field Description
CAM Shows the presence of the CAM/CAS module
The following fields can be edited on the Edit conditional Access Configuration page:
Edit Field Description
Enabled Check this box to enable the CAS to descramble the data PID stream.
Radio Button: select between Decimal and Hexadecimal entries. Program #
Enter the valid program number within the PAT as a decimal or hexadecimal number. This will
be used to index into the PAT to determine the PID number of the PMT
PAT PID # Radio Button: select between Decimal and Hexadecimal entries.