Specifications

- 13 -
SETTING YEAR, MONTH, DATE, HOUR, AND MINUTE
(MODE 2)
Procedure
1. Insert the “Key-Card.” The symbol appears on the display to indicate the setting mode.
2. Press the
“OUT1” key. The symbol appears at “MODE 2” on the display.
3. Press the
or key to change the Year, Month, Date, Hour and Minute.
4. Press the “SET” key after changing each item. When the “SET” key is pressed at the end,
the buzzer beeps twice and the display returns to the start of the setting mode.
If “C-05” is displayed, press the “SET” key. (See [14] on page 21.)
[The start of setting mode]
[Year]
[Month/Date]
[Hour/Minute] [The start of setting mode]
[Example] 1:35 (PM), 21st October, 2002
Procedure [MODE 2] Display
Press the “OUT1” key.
Current Year is shown on the display.
Press the “SET” key to register the Year.
Press the or key until the display shows “10” for October.
Press the “SET” key to register the Month.
Press the or key until the display shows “21.”
Press the “SET” key to register the Date.
Press the or key until the display shows “13.”
Press the “SET” key to register the Hour.
Press the or key until the display shows “35.”
Press the “SET” key to register the Minute.
The display returns to the start of setting mode.
1. The symbol appears during Daylight Saving Time when it has been set.
2. In Europe, set Date first and Month second.
3. The clock starts at “00” seconds when the “SET” key is pressed at the end.