User manual

40
17. Switching nominal/actual temperature (S-A)
In the factory settings, the display will show the nominal
temperature.Inthecongurationmenu,youcanchange
the display setting from nominal to acutal temperature.
• Open the configuration menu by pressing the
menu button.
• Select the (S-A) menu item with the (+) and (-) but-
tonsandconrmwiththeOKbutton.
• Now set the format you want to show on the display
(„SEt“forthenominaltemperatureand„ACt“for
the actual temperature) with the (+) and (-) buttons.
• ConrmsettingwiththeOKbutton.
If the actual temperature is selected,
thedisplaywill disbplay „SEt“ for 5
seconds on change of the nominal
temperature (or on change of mode).
Afterwards, the display automatically
changes back to actual temperature.
18. Comfort and reduced temperature (
)
The comfort (
) and reduced ( ) temperature buttons
make switching between comfort and reduced temperature
simple and user friendly. The factory setting for the comfort
temperature is 21.0°C and the reduced temperature 17.0°C.
These can be changed permanently as follows:
• Press the comfort (
) / reduced ( ) temperature
button for a few seconds.
• The display shows the respective symbol and the
corresponding comfort or reduced temperature.
• Change the temperature with the (+) and (-) buttons.