User manual

you are working with a wooden wall, you can pre-

drill 1.5 mm holes to make screws easier to insert.

• Use the screws and plugs supplied to fasten the

mounting plate to the wall.

• Next, attach the frame to the mounting plate.

• Attach the Wall Thermostat. Make sure that the ar-

rows on the back side point upwards and that the

clips on the mounting plate latch into the openings

on the electronic unit.

8. Installation in multiple combinations

You can mount the MAX! Wall Thermostat with the attach-

ment frame provided or use it with frames of other ma-

nufacturers as well as integrate the electronic unit into a

multi-gang frame. In both cases, mounting with adhesive

strips and screws is possible. For mounting with multiple

combinations, make sure that the mounting plate of the

WallThermostatisseamlesslyalignedtothealreadyxed

mounting plate/retaining ring.

TheMAX!WallThermostatisdesignedtotintoframes

supplied by the following manufacturers:

Manufacturer Frame

Berker S.1, B.1, B.3, B.7 Glas

ELSO Joy

GIRA System 55, Standard 55, E2,

E22, Event, Espirit

merten 1-M, Atelier-M, M-Smart,

M-Arc, M-Star, M-Plan

JUNG A 500, AS 500, A plus, A creation