User manual

30
• Turn the Wall Thermostat over to remove or insert
the batteries according to the illustration.
• After removing the old batteries, please wait ap-
prox. 10 seconds before inserting the new ones.
• You can now enter two LR03 batteries (Micro/AAA)
into the battery compartment, making sure they
are the right way round according to the drawings.
• Put the Wall Thermostat back into the frame.
An empty battery symbol (
) indicates that the bat-
teries need to be replaced. If, in addition, a V or S are
displayed, the batteries of a taught-in Heating Ther-
mostat (V) or Window Sensor (S) have to be replaced.
Never recharge standard batteries. Doing so will pre-
sent a risk of explosion. Do not throw the batteries
intoare.Donotshort-circuitbatteries.
6. Setting date and time (dAt)
Afterinsertingorreplacingbatteriesthermwareversion
numberwillbeshownbriey.Accordingly,dateandtimewill
be requested automatically. Settings can be changed with
the (+) and (-) buttonsandconrmedwiththeOKbutton.
Year: Month and Day:
• Settheyear,monthanddateandconrmeachset-
ting with the OK button.