User Manual
Copyright Century UK Limited 2021 www.centuryuk.com
Revision V1.1
5. Tail Control Horns
Connect the rudder and
elevator snap-links to their
respective control horns as
shown in images to the right.
Minor adjustment to obtain
perfect neutral positions
of the control surfaces can
be achieved by rotating the
plastic link on the threaded
portion of the control push-
rod.
Make certain the plastic link
is securely “snapped” closed
when connected to the control
horn.
4. Tail-Plane Fixing
Fix the horizontal tail-plane
and vertical n in position
with the two 2.6 x 35mm
screws provided. The screws
must be tightened sufciently
to securely x the parts in
position, however be careful
not to over-tighten the screws.
2 x 2.6 x 35mm Screw